www.uniwnet.com
Webclient for
RST4R3, RST4R3-230 and UNGM1 controllers
version 3.0
Rzeszow
June 2019
Contents
1 Dictionary 2
2 Basic functions of the WebClient interface 3
3 Log in 4
4 Activation of the RST4R3 and RST4R3-230 controller 4
5 Editing the RST4R3 and RST4R3-230 controllers 5
6 Activation of the UNGM1 controller 6
7 Editing the UNGM1 controller 6
8 Activation of the UNOW16 controller 7
9 Editing the UNOW16 controller 9
10 Physical controllers 9
10.1 Ports and thermometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
10.1.1 Virtual thermometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10.2 Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
10.2.1 Operating algorithm of conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
10.2.2 Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
10.2.3 Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
10.2.4 Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
11 Virtual controllers 21
11.1 Defining virtual controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
11.2 Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
12 API 24
12.1 API methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
12.1.1 download controller parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
12.1.2 taking measurements to a file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
12.1.3 download temperature chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
12.2 RW API methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
12.2.1 change of the OUT port state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
13 Webklient subscription 27
13.1 Two-factor authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
13.2 Technical requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Webclient
1 Dictionary
physical controller RST4R3, RST4R3-230 or UNGM1 controller
virtual controller a controller created from the connection of two or more physical controllers, having the charac-
teristics of a physical controller
virtual thermometer a thermometer created from the arithmetic effect of two thermometers
UNIWNET
c
All rights reserved 2011-2019 2
Webclient
2 Basic functions of the WebClient interface
The WebClient interface allows you to manage multiple RST4R3, RST4R3-230 and UNGM1 controllers from one place
using the https://webklient.uniwnet.com website. Controllers do not have to be directly accessible from the Internet, it is
enough to connect to the rds.uniwnet.com server.
Basic parameters of the WebClient interface:
viewing the status of all OUT and INOUT ports;
preview of measurements from thermometers and humidity sensors;
the ability to manually change the state of any OUT port;
the ability to reset the INOUT port counters;
the ability to define up to 50 conditions for each controller;
temperature charts from the last 365 days with a frequency of 1 minute;
graphs of changes in the states of OUT and INOUT ports;
logs of performed operations from the last 365 days;
the ability to add any number of controllers;
defining virtual controllers from any number of physical controllers;
defining virtual thermometers for physical controllers and virtual controllers;
statistical reports.
UNIWNET
c
All rights reserved 2011-2019 3
Webclient
3 Log in
You should start working with the WebClient interface after logging in. To do this, please call https://webklient.uniwnet.com
in your web browser.
Figure 1: Log in
After successful logging, the form Management shown in the figure 2 is shown.
Figure 2: Form Management - first login
The form is divided into four sections. In the first section, there are main menu buttons that allow you to navigate to the
next main functionalities of the WebClient interface. The remaining three sections allow you to manage virtual controllers
and physical controllers.
4 Activation of the RST4R3 and RST4R3-230 controller
With the RST4R3 or RST4R3-230 controller, click on the Add button, available in the RST4R3 controllers section.
The Add RST4R3 controller form will appear, shown in Figure 3, allowing you to add a new controller to the WebClient
interface.
Enter the correct MAC address, controller password and optional description on the back. Other controller parameters
will be completed automatically during the first communication between the controller and the WebClient interface and
UNIWNET
c
All rights reserved 2011-2019 4
Webclient
Figure 3: Adding the RST4R3 controller
will be available during editing. The password when adding the controller must be the same as the password given in the
controller in the remote access password field on the user and password tab.
After entering the correct controller information, click the Save button.
Figure 4: RST4R3 controller added
The figure 4 shows the newly added RST4R3 controller. The last step of connecting the controller with the WebClient
interface is to activate the controller. The activation process is automatic and can take up to 24 hours, but usually takes a
few minutes. We are informed about the completion of the activation process via e-mail.
5 Editing the RST4R3 and RST4R3-230 controllers
Editing the basic configuration of the RST4R3 and RST4R3-230 controllers is available after clicking on the Edit button,
visible in the controller’s line. The parameter Email Notifications, shown in the figure 5, specifies the time after which a
message with the information about controller inaccessibility is sent.
UNIWNET
c
All rights reserved 2011-2019 5
Webclient
Figure 5: Editing the RST4R3 controller
6 Activation of the UNGM1 controller
To add a UNGM1 controller, click on the Add button, available in the UNGM1 section. A form that allows you to add
a new controller to the WebClient interface, shown in the figure 6, will appear
Figure 6: Adding the RST4R3 controller
Enter the correct IMEI address, available on the back of the controller, name, password and optional description. The
other parameters will be available when editing the controller configuration.
After entering the correct controller information, click the Save button.
In the figure 7 the newly added UNGM1 controller is shown. The last step of connecting the controller with the WebClient
interface is to activate the controller. The activation process is automatic and can take up to 24 hours, but usually takes a
few minutes. We are informed about the completion of the activation process via e-mail.
7 Editing the UNGM1 controller
Editing the basic configuration of the UNGM1 controller is available after clicking on the Edit button, visible in the
controller’s line. The parameter Email Notifications, shown in the figure 8, defines the time after which the message about
UNIWNET
c
All rights reserved 2011-2019 6